HalfMoon Education Inc. Knowledge Gets You There

Presenter: Matthew S. Fine LEED-AP, CPHC, and 1 more

Recording Date:

Recording Location: Richmond, VA

Type: CD/Manual Package

Product Code: 16118

Product Number: 19 VAPSVHSE 7 24 CDMN CP

State-Specific Continuing Education Info:


This audio recording is approximately 6.5 hours in length and is available for $289 (including shipping). Please refer to specific state licensing rules or certification requirements to determine if this learning method is eligible for continuing education credit.

How to Use

HalfMoon will mail you these materials via USPS. Please allow 5 weeks from the date of purchase to receive your product. If the live seminar is in the future, please allow 5 weeks from the date of the live seminar.

The CD/Manual package includes an audio recording of a live seminar on CDs, along with a bound copy of the manual that was distributed at the seminar. The manual contains written materials prepared by the seminar speaker(s).

The CDs contain embedded number codes, which you are required to document and return to HalfMoon if you wish to obtain a certificate of completion for the program. The acceptance of self-administered continuing education activities vary widely between states and professions. Before undertaking any self-study effort, you should review the rules of your licensing/certifying entity.

HalfMoon Education guarantees its products. The self-study products are recorded from a live seminar and there are circumstances where an audio recording is not available. HalfMoon will contact you and issue a full refund if the product you ordered is not available. If you are not happy with a product you receive, you can return the product for a full refund. However, refunds will not be issued if completion certificates are requested.


Registration:                        8:00 - 8:30 am

Morning Session:                8:30 am - 12:00 pm

Lunch (On your own):         12:00 - 1:00 pm

Afternoon Session:             1:00 - 4:30 pm


   Change everywhere

Passive House Roots in the US and Canada

   The 1973 oil embargo and first efforts at energy efficiency 
   “Mass & glass” vs. improved envelope 
   Synthesis in first Passive House

Passive House Standard: Purpose, Principles and Development

   Adoption of US energy efficiency standards 
   Passive House: voluntary, measured performance-based building energy standard 
   Overview of PH standard’s criteria 
   Common elements in achieving the criteria 
   Energy calculation tools: an introduction to tools and their functionality 
   Certifying agencies in US: PHI and PHIUS 
   CPHC training 
   Integrated design process

Architectural Elements of Passive Houses in our Climate

   Size and form 
   The building envelope 
      • Super-insulated envelope 
      • No thermal bridges 
      • Airtight 
   Solar orientation 
   Summer shading and cooling strategies 
   Winter solar gain and heat retention strategies 
   Energy recovery ventilation 
   High efficiency mechanical equipment 
   High efficiency lights, fixtures and appliances 
   Integrating renewable energy technologies

Mechanical Systems in Passive Houses

   Return to less reliance on active measures 
      • Effects of better envelopes 
      • Effects of internal gains
   Attention to glazing percentage 
   Energy recovery ventilation 
   Air distribution 
   Domestic hot water
   Energy-efficient appliances

Passive Houses in Mixed Humid, mid-Atlantic

   Limitations on design 
   Basement construction 
   Spec house 
   Modular houses
   Zero and positive energy houses 


   Single family retrofit 
   Multifamily retrofits

Passive + Direct Current Microgrids to Facilitate Net Zero Energy



Matthew S. Fine LEED-AP, CPHC,

Project Manager at Peabody Architects

Mr. Fine has over 10 years of experience in project design, management, and production services. His responsibilities have ranged from conceptual design through contract administration to project closeout. Much of Mr. Fine’s knowledge and expertise centers on multi-family residential, mixed-use, urban infill, interior fit-out and adaptive re-use. Mr. Fine received his Bachelor of Arts in Architecture degree from the University of North Carolina, Charlotte. As a LEED® accredited professional, he continually seeks to push sustainable and innovative building solutions while addressing the most basic, but often overlooked, role of architecture. Mr. Fine is a certified Passive House consultant (PHIUS). Previously, Mr. Fine served as director of ZA+Dpassiv, a division of Zavos Architects. He was the project leader of that firm’s very successful 2015 Weinberg Commons project, a Passive House retrofit of three 1950’s multifamily housing units. He also has experience in high-performance single family homes. He designed Arlington’s first Passive House in 2012, and two Passive House townhouses (Habitat Empowerhouse) in Ivy City 2014.

David Peabody LEED-AP, CPHC,

Peabody Architects in Alexandria, VA

Mr. Peabody has led Peabody Architects, in Alexandria, Virginia, since 1992, designing more than 100 homes and additions. Witnessing and participating in the growth of sprawl in the suburban DC area through the ‘90’s led to awareness that the way building is done today is not sustainable, and a conviction that architects cannot sit on the fence on environmental issues. Since committing the practice to sustainable design in 2000, he has become increasingly active in issues regarding architecture and the environment, and he has made these issues central to the way the firm approaches its work. In 2004, he became a LEED accredited professional, and in 2009 he became a Passive House certified consultant– one of the first architects in the country to achieve this certification. Mr. Peabody earned his Master of Architecture degree in 1977 from Yale School of Architecture.