HalfMoon Education Inc. Knowledge Gets You There

Back to Search

Presenter: Howard Alderson, P.E.

Seminar Date:

Seminar Location: White Plains, NY

Crowne Plaza White Plains
66 Hale Avenue
White Plains, NY 10601
Phone: 914-682-0050

This seminar is closed or full.

Agenda:

Registration:                        8:00 - 8:30 am

Morning Session:                8:30 am - 12:00 pm

Lunch (On your own):         12:00 - 1:00 pm

Afternoon Session:             1:00 - 4:30 pm


The Geothermal Heat Pump Concept and the Refrigeration Cycle

  Examining system components
   Understanding the vapor compression cycle
   Typical pressures and temperatures
   Other definitions and information


Understanding Earth Loop Systems

   Architecture of closed loop systems
      • Horizontal
      • Vertical
      • Directional
      • Pond
      • Hybrid systems
   Open loop systems
      • Well systems
      • Pond/lake
   Standing column wells


Designing Geothermal Systems

   Siting the system
   Making heat loss calculations
   Sizing the unit
   Sizing the loop


Case Study #1

Choosing System Components

   Water-to-air systems
   Water-to-water systems
   Domestic hot water options
   Pumps, heat exchangers, expansion tanks, etc.


Evaluating the Benefits of Geothermal Systems

   Measuring performance
   Calculating efficiency, savings and cost
   Environmental benefits
   Tax credits, incentives and rebates


Maintaining Geothermal Systems

   Performing routine maintenance
   Troubleshooting problems


Case Studies of Existing Residential, Commercial and
Institutional Systems

Credit Information:

Who Should Attend

  • Architects
  • Engineers
  • Contractors

Professional Engineers
     6.5 Continuing Ed. Hours

Architects
     6.5 HSW Continuing Ed. Hours
     6.5 AIA HSW Learning Units

Contractors
     Non-Credit Continuing Ed.


Continuing Education Credit Information

This seminar is open to the public and offers up to 6.5 continuing education hours to professional engineers and 6.5 HSW continuing education hours to architects in all states.

This event is approved by the American Institute of Architects for 6.5 HSW Learning Units (Sponsor No. J885). Courses approved by the AIA qualify for New Jersey architects. Only full attendance can be reported to the AIA/CES.

The New York State Education Department considers courses as approved for New York State mandatory continuing education for professional engineers if the sponsor’s courses are approved by the American Institute of Architects Continuing Education System and/or the Landscape Architecture Continuing Education System and are in approved subject areas.

HalfMoon Education is an approved continuing education sponsor for engineers in Florida, Indiana (License No. CE21700059), Maryland, North Carolina, and North Dakota.

This event offers a non-credit continuing education opportunity to construction contractors. It has not been approved by any state with a continuing education requirement for contractors.

Speakers:

Howard Alderson, P.E.

President of Alderson Engineering, Inc. – Southhampton, PA

Mr. Alderson is the owner, chief mechanical engineer, and certified geoexchange designer of his company. He has owned and worked for mechanical contracting firms prior to becoming a consulting engineer, giving him insight and experience in the actual construction of mechanical systems. Prior to forming Alderson Engineering, Inc., in 1990, he worked at a Philadelphia-based consulting engineering firm for 10 years. He is frequently a guest speaker at various conferences, with expertise in the area of ground source heat pump systems. He served as the national director of the Consulting Engineering Council (CEC) of Pennsylvania after having served as president of the organization.

Mr. Alderson’s projects range from geothermal projects for health care facilities, office buildings, industrial projects, retail projects, government facilities, university campus facilities, hotels and motels to residential projects. He has been responsible for the design of hundreds of millions of dollars’ worth of mechanical, plumbing, and electrical building systems.

Mr. Alderson received his B.S.M.E degree from Drexel University, with a specialty in thermodynamics and fluid mechanics. He is a member of the Consulting Engineers Council (CEC) Philadelphia Chapter (past chapter president), the Consulting Engineers Council of Pennsylvania (CEC/PA) (board of directors, past president, national director); the American Society of Heating, Refrigeration, and Air Conditioning Engineers (ASHRAE); the American Society of Plumbing Engineers (ASPE); the International Ground Source Heat Pump Association (IGSHPA); the International Code Council (ICC); and the National Fire Protection Association (NFPA).

Tuition Costs:

Standard Tuition: $289.00
Online Tuition (pre-registration): $289.00
Group Prices
3 or more People: $269.00

Each registration includes one copy of a manual prepared by the seminar speakers.

AIA Info:

AIA Provider Statement:

HalfMoon Education Inc. is a registered provider of AIA-approved continuing education under Provider Number J885. All registered AIA/CES Providers must comply with the AIA Standards for Continuing Education Programs. Any questions or concerns about this provider of learning program may be sent to AIA/CES (cesupport@aia.org or (800) AIA 3837, Option 3).

This learning program is registered with AIA/CES for continuing professional education. As such, it does not include content that may be deemed or construed to be an approval or endorsement by the AIA of any material of construction or any method or manner of handling, using, distributing, or dealing in any material or product.

AIA continuing education credit has been reviewed and approved by AIA/CES. Learners must complete the entire learning program to receive continuing education credit. AIA continuing education Learning Units earned upon completion of this course will be reported to AIA/CES for AIA members. Certificates of Completion for both AIA members and non-AIA members are available upon request.

Course Title: Geothermal Heating and Cooling: Technology and Applications

Delivery Method: Live

Course Description: This 6.5 hour live lecture presentation covers the geothermal heat pump concept and refrigerator cycle, earth loop systems, designing geothermal systems, choosing system components, the benefits of geothermal systems, and maintaining geothermal systems.

Learning Objectives:

Learning Objective 1:
Learners will be able to explain the principles and function of geothermal heating and cooling systems and describe the benefits of geothermal systems.

Learning Objective 2:
Learners will be able to differentiate closed loop systems and open loop systems and explain applications of each.

Learning Objective 3:
Learners will be able to discuss the design principles of geothermal systems and how to choose system components.

Learning Objective 4:
Learners will be able to calculate the efficiency, savings and costs of geothermal heating and cooling systems, describe the environmental advantages of geothermal systems, and identify available tax credits, incentives and rebates for systems.

LUs:  6.5                                                                                             LU Type:  LU|HSWs. 

Prerequisites: Familiarity with HVAC systems

Advance Preparation: None

Program Level: Intermediate

Course Expiration Date: 02/04/2022

Complaint Resolution Policy:

Complaints regarding this course can be emailed to doug@halfmoonseminars.org or by calling (715) 835-5900. A HalfMoon Education representative will respond within 72 hours to resolve the complaint, which will include, but not limited to, access to another CE activity at no or reduced cost, or a full or partial refund. Each instance will be resolved on a case-by-case situation.